Rotary Gear Pump
GEAR PUMP FT SERIES
Transmission Chain Centre is a Leading Manufacturer and Supplier of Rotary Gear Pumps, Gear Pumps, Rotary Gear Pump, and Rotary Pump in India.
Rotary Gear Pumps work on the principal of positive displacement, It has a rotor and idler gear assembly to generate its flow. These pumps are primarily used in chemical plants and at all the other places where viscous and semi-liquids are utilized
Transmission Chain Centre is the leader in “ROTOFLUID” brand Rotary gear pump Model “FT” (Rotary Gear Pump) which is self priming, foot mounting type positive displacement Rotary Gear Pump, FT Model Series have simple 2 pieces of Cast Iron construction and is a single helical modified profile carton steel idler gear shrink fitted on alloy steel hardened and a grind finished shaft and the gear is firmly supported by 4 numbers of self lubricated sintered bronze bush bearing which ensure smooth running. Rotary Gear Pumps flow are bi directional that is it can be run in either direction with change in inlet-outlet port position. The relief valve operations can be reversed by simply changing the connections to the opposite side.
The suction and delivery connections are available in 1/4″ to 3″ sizes. Rotary Gear Pumps can be operated up to pressure of 10 kg/cm² with 5 LPM to 500 LPM flow capacity. Rotary Gear Pumps are designed to run at 1440 RPM up to viscosity of 50,000 to 1,00,000 SSU and maximum temperature up to 200ºc. It is desirable to reduce speed for size above 1½” performance at low speed is always advantageous as it improves efficiency, reduce noise level and enhances operational life. The capacity is inversely proportional to the speed and it will reduce if the speed increases.
Download documents
Rotary Gear Pump Technical Specification
Model
Suction & Delivery Size
Capacity at 1440 RPM
LPM
US GPM
M³/hr
FT-025
1/4" x 1/4"
2.5
0.66
0.15
05
1.32
0.3
FT-050
1/2" x 1/2"
10
2.64
0.6
20
5.28
1.20
FT-075
3/4" x 3/4"
25
6.60
1.5
30
7.92
1.80
FT-100
1" x 1"
35
9.24
2.1
50
13.20
3.00
FT-125
1 ¼" x 1 ¼"
75
19.80
4.50
FT-150
1 ½" x 1 ½"
110
29.00
6.60
FT-200
2" x 2"
225
59.40
13.50
FT-250
2 ½" x 2 ½"
350
92.50
21.00
FT-300
3" x 3"
500
131.60
30.00
| Model | Suction & Delivery Size | Capacity at 1440 RPM | ||
| LPM | US GPM | M³/hr | ||
| FT-025 | 1/4" x 1/4" | 2.5 | 0.66 | 0.15 |
| 05 | 1.32 | 0.3 | ||
| FT-050 | 1/2" x 1/2" | 10 | 2.64 | 0.6 |
| 20 | 5.28 | 1.20 | ||
| FT-075 | 3/4" x 3/4" | 25 | 6.60 | 1.5 |
| 30 | 7.92 | 1.80 | ||
| FT-100 | 1" x 1" | 35 | 9.24 | 2.1 |
| 50 | 13.20 | 3.00 | ||
| FT-125 | 1 ¼" x 1 ¼" | 75 | 19.80 | 4.50 |
| FT-150 | 1 ½" x 1 ½" | 110 | 29.00 | 6.60 |
| FT-200 | 2" x 2" | 225 | 59.40 | 13.50 |
| FT-250 | 2 ½" x 2 ½" | 350 | 92.50 | 21.00 |
| FT-300 | 3" x 3" | 500 | 131.60 | 30.00 |
Additional Information
Features
- Simple and Efficient design.
- Single helical gear design.
- Low noise.
- Wide capacity range.
- Easy to maintain.
- With relief valve design.
- High efficiency.
- Optionally available in double helical gear design.
- Self priming pump.
- Bi-direction positive displacement pump.
Application
- All kinds of mineral Oils.
- Printing inks.
- Dyes and Resins.
- Glycerine or Glycol.
- Bitumen.
- Fuel oil, Diesel oil, Furnace oil.
- Refineries.
- Power plants.
- Steel / Cement plants.
- Oil storage installation.
Related Products
